Evaluation of the Effectiveness of using the Plowshare

K K Nuriev,; M A Bakhronova

Authors

K K Nuriev,
M A Bakhronova

Abstract

Annotation-The article analyzes the "life" cycle of the plowshare and shows an effective solution to increase the resource. The analysis of complex factors affecting the wear of the ploughshare emphasizes their main ones. The working condition of the ploughshare is evaluated and the essence of the influencing forces on its wear is revealed. A mathematical model for determining the ploughshare resource is derived. Having solved the model using the example of a plowshare for different values of their components, it is determined that the resource of the plowshare decreases with increasing width and angle of the occipital chamfer, and at the same time, with increasing width, especially in hard soils, the resource decrease is observed at a more intensive rate. It is established that an increase in the width of the rear chamfer by 1 mm and the angle by 10 reduces the life of the plowshare by 33% and 12%, respectively, and an increase in the plowing depth by 1 cm reduces the life of the plowshare by 16%.

Downloads

How to Cite

Evaluation of the Effectiveness of using the Plowshare. (2023). Global Journal of Science Frontier Research, 23(D4), 5-11. https://journalofscience.org/index.php/GJSFR/article/view/102775

Download Citation

References

D Mironov (2017) Substantiation of structural and material science parameters that ensure an increase in the resource and efficiency of ploughshare working bodies.

I Liskin, V Liskin, D Mironov, S Sidorov (2014) Innovative development of the agroindustrial complex of Russia on the basis of intelligent machine technologies: Collection of scientific documents. 101-104.

S Sidorov (2013) Justification of increasing the operational and resource characteristics of plowshares/Agricultural machines and technologies. 14-17.

V Denisov, N Kozhukhova, G Orekhova, M Mikhal'chenkova (2016) Influence of ploughshare design and welding reinforcement on the hardness of its nose part. 83(7), 36-40.

I Liskin, S Sidorov, D Mironov (2014) Substantiation of geometric and setting parameters of plow working bodies for heavy soils. (12), 14-16.

V Denisov, N Yu (2016) The influence of the ploughshare design and surfacing reinforcement on the hardness of its nose. (7), 36-40.

A Mikhalchenkov, I Kozarez, Yu. Filin, M Mikhalchenkova (2017) Removal of solid filler particles from composite with polymer matrix as abrasive wear factor. 0(11), 28-32.

A Kolomeichenko (2014) Tests on the wear of the working surfaces of the paws of cultivators hardened by flame spraying of powder material / Kolomeichenko A. 117, 204-207.

V Komogortsev Theoretical and analytical consideration of the movement of light soil particles on a reinforced surface / Komogortsev V.

A Mikhalchenkov, Yu. Filin, S Feskov, M Mikhalchenkova (2015) Forecast of residual life of "lemken" plough bits and dimensional groups of parts suitable for operation. 0(12), 40-45.

A Mikhalchenkov, I Kozarez, A Dyachenko, A Tyureva (2016) Wearing and service life of agricultural machine blades restored by various technologies. 0(1), 47-51.

R Bayer, U Clinton, K Nelson, R Schumacher (1964) Note on the application of the dependence of wear on stress. 7, 289.

K Nuriev, M Nuriev (2022) Patent UZ FAP 02154. 12(2), 30-42.

K Nuriev, M Nuriev, O Rakhmatov, Sh, M Karabekova, Bahronova (2022) Determination of the total resistance of the ploughshare when the blade is blunted. ETESD-2022. 1112, 12014.